Featured Solution
SSB Wind

SSB BladeVision System

High-precision embedded imaging solution for a wind turbine

SSB Wind Systems provides advanced technology solutions for on- and offshore wind turbines.

Founded in 1970, SSB Wind Systems offers pitch systems, switch, and control cabinets as well as blade vision products.

The Application

The SSB BladeVision system for wind area measurement in the rotor blade not only detects wind selectively, but also across the surface area of the rotor blades. SSB Wind’s advanced sensor has been designed to meet this challenge: BladeVision doesn’t just measure wind speed and direction. It provides a complete wind-field description over the swept area of the blades. This completeness provides operators with important data about wind factors affecting the performance of different types of Wind Turbine Generators (WTGs) in wind parks.

The Solution

The Embedded Vision System rotates in the hub of wind turbines and captures a large amount of data by measuring the rotor blade bend. This data is used to optimize the efficiency and management of wind farms. PHYTEC provided both a phyFLEX-i.MX 6 System on Module and a parallel camera module with color CMOS sensor to drive this application.

Enabling Products and Services from PHYTEC

Hardware: Custom configuration of the phyFLEX-i.MX 6 System on Module

Hardware Design: Development of custom Carrier Board to interface with the SOM as well as a PHYTEC off-shelf parallel camera module with color CMOS sensor

Software Design: Adaptation of camera drivers for the standard PHYTEC Linux Board Support Package (BSP)

 

Featured Product

phyFLEX®-i.MX 6

70 mm x 60 mm
Cortex®-A9 Single | Dual | Quad
USB 2.0​
LVDS

Scalable module ideal for high performance multimedia applications.

Featured Design Service

Custom Hardware

Let PHYTEC help you expedite your product development. We offer schematic capture and layout design services to integrate a PHYTEC SOM into your project.

Ready to get started?

Let’s go. Get in touch with PHYTEC today.