Cost-efficient and secure
36 mm x 36 mm
The industrial phyCORE-i.MX 6UL is based on the NXP i.MX 6UltraLite processor. PHYTEC’s lowest power SOM to date, with power consumption under 500mW in idle mode, is well suited energy-efficient and compact applications such as HMI, control systems, and IoT. The SOM has been designed with solder contacts around the outside for easy integration and reduced system cost.
The i.MX 6UL Processor
The NXP i.MX 6UL series expands the i.MX 6 series by adding a high-performance but ultra low power embedded processor which is based on Arm® Cortex®-A7 technology. Along with providing standard IO the i.MX 6UL applications processor also includes an integrated power management module.
phyCORE-i.MX 6UL interfaces are routed to solder contacts around the outside edge of the PCB. The SOM can be directly soldered to your carrier board. This removes the need for connectors and reduces overall board cost.
The phyCORE-i.MX 6UL may be small in size but it still retains many important features. Ethernet, SD/SDIO, CAN, USB, even a display and camera interface are all supported.
Software that is specifically designed for its hardware
PHYTEC Board Support Packages (BSPs) are software bundles that implement and support operating systems on our System on Modules. PHYTEC BSPs are application development-ready, offering all essential drivers and board-level feature support. The only task left for you is application integration. This way, you can focus on your core competencies while we take care of the rest.
With dimensions of 36 mm x 36 mm it is well suited for small enclosures.
phyCORE-AM57x SOM Tech Specs
TI Sitara AM5716/8
Ti Sitara AM5726/8
1.5 GHz / 500 MHz
C66x DSP cores
Single 3D accelerator (SGX544)
Dual 3D accelerator (SGX544)
Simultaneous Ethernet ports
45 mm x 55 mm
SOM Specification Overview