Featuring the phyBOARD-i.MX6 ULL Single Board Computer

phyBOARD®-i.MX 6UL Development Kit

Root Part #: KPB-02013

Featuring the phyCORE-i.MX 6UL System on Module

$129.00

Product Overview

The kit features the phyCORE-i.MX 6ULL, which is based on the NXP i.MX 6ULL processor. PHYTECs lowest power SOM to date, with power consumption under 500mW in idle mode, is well suited energy-efficient and compact applications such as HMI, control systems, and IoT.

Learn more about the phyCORE-i.MX 6UL
Expand All

Features

SOM Features

NXP i.MX 6ULL-Y2 792 MHz
512 MB DDR3 RAM
512 MB NAND Flash
4 kB EEPROM
1x 10/100 Ethernet PHY
124-pin scalloped edge direct solder interconnect

Carrier Board Features

1x Micro-SD Card slot
1x USB 2.0 Standard A Host
1x USB 2.0 Micro-AB OTG
2x 10/100 Mbit/s Ethernet (RJ45)
Parallel Display via expansion interface
10-bit Parallel Camera Interface (phyCAM-P)
Audio via Expansion interface
1x RS-232 serial ports (2x5 pin header)
2x UART via Expansion Connector
2x CAN ports (2x5 pin header to DB9 and expansion connector)
60-pin Expansion interface
Super Cap (Electrostatic Double-Layer Capacitor)
12V/2A 2-pin Phoenix Power Input (power expansion)

Ready to get started?

Let’s go. Get in touch with PHYTEC today.