PhyFLEX-i.MX6 Compact 7 BSP-PD13.1.0

From PHYTEC Wiki

Jump to: navigation, search


Contents

Introduction

This BSP provides a basis for development, deployment and execution of Compact 7 based applications on the phyFLEX-i.MX6 System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.

Versioning

Release PD13.1.0 is based on the following:

This Release is compatible with the following hardware:

BSP Release Version BSP Release Date SOM PCB Version FLEX Mapper Board Version FLEX Baseboard Version
PD13.1.0 April 5th, 2013 1362.1 1367.1 1364.2

BSP Download

Release PD13.1.0 can be downloaded from the link below.

ftp://ftp.phytec.com/products/PFL-A-02_phyFLEX-iMX6/Compact7/PD13.1.0/

Quickstart

Release PD13.1.0 should be used in conjunction with Quickstart version PD13.1.0:

What’s Supported

This BSP Release supports the following components:

Resistive: STMPE811 on I2C0 (device on carrier board)
Prime View PM070WL4 LVDS (LCD-017-070W)

Note: Signal names may change between processor and PCBs. Please refer to phyFLEX-i.MX6 Hardware Manual for signal name mapping.

What’s Not Supported

This BSP Release does not support the following components:

EDT ETM0700G0DH6 TTL (LCD-018-070-KAP)

Fixed in this Release

New in this Release

Known Issues

Workaround: Remove SD Card Driver from the Catalog

Upgrade and Compatibility Information

This BSP is not backwards compatible due to a change in PCB pinout, see Modification of the pinout for the phyFLEX-i.MX6 (PLF-A-XL1). The BSP is specific to SOM: 1362.1 and Carrier Board: 1364.2 and will retain compatibility with future released PCB revisions.

Dependencies

N/A

Validation Information

Drivers have been tested with a combination of in-house test cases, as well as with the Windows Embedded Compact7 Test Kit (installed along with Windows Compact 7) where applicable.

Technical Support

For further information or to report any problems, visit the PHYTEC Community or contact support@phytec.com.

Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox