miniMODUL-167
High-end SBC featuring CAN in Credit-card Dimensions
The PHYTEC Advantage
With over 20 years of experience, see what makes PHYTEC the best choice for your development needs.
Faster-to-Market
Take advantage of PHYTEC products to shorten time-to-market, reduce development costs, and avoid substantial design risks.. More…
Make vs. Buy
Why make your own when you can buy PHYTEC off-shelf solutions? More…
Design Services
Let PHYTEC assist you in the design of your end product. More…
Immediate Support
Talk to PHYTEC technical staff with every call. No waiting for answers. More…
Your OEM solution
Low EMI and Mix-Speed design, robust interconnects, industrial temp range, production-ready BSPs. More…
|
|
SBC ModulePART #: MM-311 $279.00 / single unit
|
Rapid Development Kit$299.00 (including module) More... |
Description | Features | Documentation & Demos | OEM Services
Rapid Development Kits | RTOSes & Tools | Related Products
SBC Module Description
The miniMODUL-167 is intended for use in memory-intensive applications and in driving a CAN-bus interface. The size of a credit card (85 by 55 mm.), the standard board is populated with the Infineon C167CR controller and runs at a 20 MHz clock speed, delivering instruction cycles in 100 ns. The standard memory configuration boasts 256 KB (up to 2 MB) SRAM and Flash on-board for DATA and CODE storage. PHYTEC FlashTools enable easy on-board download of user code. The board also features a Real-Time Clock which, like the SRAM, can be buffered by an external battery. All controller signals and ports extend to 2.54 mm. pitch pin headers aligning three edges of the board. These pins provide a 16-bit bi-directional I/O port and 64+ free port lines, and a 16-channel ADC with 10-bit resolution. The module is mounted with an RS-232 transceiver supporting two serial interfaces, UART in place of a second asynchronous serial interface and a CAN transceiver. The miniMODUL-167 has a standard temperature range from 0 to 70 degrees C. (with extended range from -40 to 85 degrees C.) and requires a low 250 mA. power source.
Processor Details
The miniMODUL-167 supports the Infineon C167CR microcontroller.
SBC Module Features
- Credit card-sized (85 x 55 mm) SBC
- Infineon C167CR controller (20 MHz) with on-chip Full CAN 2.0B (can be optionally populated with Infineon C167CS or ST10F168 controllers)
- Instruction cycle time of 100 ns. in 16-bit, non-multiplexed bus-mode
- 16 MB linear address space
- 256 KB (to 2 MB) external SRAM
- 256 KB (to 2 MB) external Flash
- Flash supports on-board programming via RS-232 interface
- Up to 1 MB optional EPROM
- All controller ports & signals extend to standard-width (2.54 mm) pins aligning three edges of the board
- 16-channel A/D-converter with 10-bit resolution
- Battery-buffered Real-Time Clock (256 byte internal SRAM) and SRAM (to 1 MB)
- RS-232 transceiver supports two serial interfaces
- UART in place of a second asynchronous serial interface (configurable as RS-485)
- Full 2.0B CAN interface
- MTBF = 886,129 hours
Technical Documentation & Demos
|
Aug. 2002 |
L-625e |
172 KB |
|
|
Aug. 1999 |
L-380e |
650 KB |
|
|
Aug. 1999 |
L-449e |
627 KB |
|
|
Nov. 2000 |
TN-003e |
155 KB |
|
|
- |
C167CR |
140 KB |
|
|
May. 2003 |
C167CR |
5.8 MB |
|
Aug. 1999 |
Demos_MM-311_K |
64 KB |
|
Aug. 1999 |
Demos_MM-311_T |
128 KB |
|
Dec. 2002 |
L-084e |
560 KB |
OEM Services
- Design-In of insert-ready SBC subassemblies and design of custom-specific target hardware.
- Interfacing to Target Hardware: mating high-density Molex connectors, available from PHYTEC, are required to integrate the phyCORE into target applications.
- PHYTEC Carrier Boards serve as a Reference Design for implementing PHYTEC Single Board Computer subassemblies into target hardware
- Quantity Pricing & Custom Configurations: Contact us for quantity pricing and alternate configurations to best meet your technical and cost requirements: 800-278-9913 · 206-780-9047 · sales@phytec.com
Start-Up Guarantee
PHYTEC backs up this Rapid Development Kit Concept with a Start-Up Guarantee. Should you encounter any unexpected difficulties in executing any of the example programs contained within the Kit, we invite you to make free use of our Technical Support until the Problem is solved.
Rapid Development Kits
Each kit contains an SBC module mounted on an applicable Carrier Board that features all hardware needed for immediate start-up of the module, as well as external break-out of applicable signals from the SBC. The included PHYTEC Spectrum CD-ROM provides complete electronic documentation, demo programs and evaluation software development tools.
PHYTEC Rapid Development Kits truly offer a Rapid Development solution by providing you with all the necessary ingredients with which to jump start your embedded design, reduce time-to-market and propel your concept to prototype and finished product.
Available RDK Packages for this SBC
|
RTOSes & Tools
The availability of tools is a primary criteria in the selection of a microcontroller for embedded development. Just as PHYTEC provides board-level support and Rapid Development Kits enabling easy evaluation, test and OEM integration of microcontroller cores for embedded designs, we also work closely with other partners up and down the embedded solutions chain. This ensures optimized interoperability of our boards with other tools, and provides embedded developers with what they need to speed design concepts to product and market.
