C166/XC166/ST10/XA

phyCORE-167

PART #: PCM-009
PART #: PCM-009-C1U

This high performance 16-bit SBC module based on the Infineon C167Cx supports up to 2 CAN and 2 RS-232 interfaces as well as 64+ free port lines, 24/16-channel 10-bit ADC for complex control applications.

phyCORE-167 HSE

PART #: PCM-018-C1UE

High-speed 16-bit SBC module supporting Infineon C167Cx with 15 ns access SRAM (up to 1 MB) and up to 2 MB Flash combined with 10 Mbit/s Ethernet, dual CAN and RS-232.

phyCORE-XC161

PART #: PCM-020-0020E

16-bit sub-mini SBC with dual CAN, 10 Mbit/s, Ethernet, ADC, UARTs, SPI and OCDS based on Infineon V2 core for demanding industrial and automotive applications.

phyCORE-XC167

PART #: PCM-021-0020E

SBC module with enhanced Infineon 16-bit microcontroller, up to 2 MByte Flash, 512 kByte fast access SRAM and on-board Ethernet running at 40 MHz with multiplexed bus mode.

phyCORE-ST10

PART #: PCM-009-C2

This high performance 16-bit SBC module supporting STMicroelectronics ST10F168 has up to 2 CAN and 2 RS-232 interfaces as well as 64+ free port lines.

phyCORE-ST10 HSE

PART #: PCM-018-140C3UE

High-speed 16-bit SBC module supporting STMicroelectronics ST10F269 with 15 ns access SRAM (up to 1 MB) and up to 2 MB Flash combined with 10 Mbit/s Ethernet, dual CAN and RS-232.

phyCORE-XAC37

PART #: PCM-003-S

NXP Semiconductors (founded by Philips) XA (16-bit) controller with CAN 2.0B, dual RS-232, SPI as well as up to 2 MB Flash and 1 MB SRAM on a 55 x 47 mm SBC module for memory extensive applications.

nanoMODUL-164

PART #: NM-264

16-bit CAN power in subminiature dimension with Infineon C164CI, up to 1 MB Flash and SRAM, 8 channel 10-bit ADC, PWM, RS-232 for networked control applications.

miniMODUL-167

PART #: MM-311

High-end SBC in credit card format featuring Infineon C167CR loaded with I/Os, ADC, PWM, CAN, dual UART for complex industrial control applications in networked systems.

DIPmodul-164

PART #: MM-215

Subminiature 16-bit SBC module in DIP-40 format based on the Infineon 16-bit C164CI microcontroller plus CAN, external memory, EEPROM, and RTC.