phyCORE®-AT89C51CC01
8-bit sub-mini SBC with on-chip Flash, CAN and ADC
The PHYTEC Advantage
With over 20 years of experience, see what makes PHYTEC the best choice for your development needs.
Faster-to-Market
Take advantage of PHYTEC products to shorten time-to-market, reduce development costs, and avoid substantial design risks.. More…
Make vs. Buy
Why make your own when you can buy PHYTEC off-shelf solutions? More…
Design Services
Let PHYTEC assist you in the design of your end product. More…
Immediate Support
Talk to PHYTEC technical staff with every call. No waiting for answers. More…
Your OEM solution
Low EMI and Mix-Speed design, robust interconnects, industrial temp range, production-ready BSPs. More…
 |
LEGACY PRODUCT:Call for more information! 800-278-9913 (in the U.S.)
|
Description | Features | Documentation & Demos | OEM Services
Rapid Development Kits | RTOSes & Tools | Related Products
SBC Module Description
The phyCORE-AT89C51CC01 supports the AT89C51CC01, a member of the C51 X2 family of 8-bit microcontrollers dedicated to CAN network applications. While remaining fully compatible with the 80C51 it offers a superset of this standard microcontroller. In X2 mode a maximum external clock rate of 20 MHz reaches a 300 ns cycle time. Besides the Full 2.0B CAN controller, the T89C51CC01 provides 32 KB Flash memory supporting In-System Programming (ISP), 2 KB Boot-Flash, 2 KB EEPROM and 1.2 KB RAM. The on-chip memory is augmented by 32 KB of external SRAM and 128 KB Flash. The controller's CAN and ADC signals are available to the user at the edges of the board. The included PHYTEC FlashTools support In-System-Programming of the external Flash memory via the RS-232 interface. The Atmel FLIP utility supports programming of the on-chip Flash memory.
Processor Details
The phyCORE-AT89C51CC01 supports the Atmel AT89C51CC01 microcontroller.
SBC Module Features
- Single Board Computer in subminiature dimensions (55 x 40 mm) according to phyCORE specifications
- Atmel 8-bit 80C51-compatible AT89C51CC01 microcontroller (PLCC-44, 20 MHz clock frequency)
- All ports and decoded interface-signals extend to standard 2.54 pitch pin header rows aligning the edges of the circuit board
- Flexible address decoding and generation of /CS-signals and different memory models
- 128 (to 512) KB external Flash supporting in-system (ISP) Flash programming
- 128 KB (to 1 MB) external SRAM
- Serial interface configurable as RS-232 and/or RS-485 (jumper selectable)
- CAN 2.0B interface via 82C251 CAN transceiver
- 10-bit resolution A/D-converter with 8 multiplexed inputs
- 5-channel 16-bit PCA with 8-bit PWM (8-bit), high-speed output, timer and edge capture
- double Data Pointer
- 21-bit Watchdog timer (including 7 programmable
bits) - Optimized structure for communication management (via SFR)
- Idle and Power-Down mode
Technical Documentation & Demos
|
Aug. 2001 |
L-579e |
569 KB |
|
|
Jul. 2002 |
L-580e |
802 KB |
OEM Services
- Design-In of insert-ready SBC subassemblies and design of custom-specific target hardware.
- Interfacing to Target Hardware: mating high-density Molex connectors, available from PHYTEC, are required to integrate the phyCORE into target applications.
- PHYTEC Carrier Boards serve as a Reference Design for implementing PHYTEC Single Board Computer subassemblies into target hardware
- Quantity Pricing & Custom Configurations: Contact us for quantity pricing and alternate configurations to best meet your technical and cost requirements: 800-278-9913 · 206-780-9047 · sales@phytec.com
Start-Up Guarantee
PHYTEC backs up this Rapid Development Kit Concept with a Start-Up Guarantee. Should you encounter any unexpected difficulties in executing any of the example programs contained within the Kit, we invite you to make free use of our Technical Support until the Problem is solved.
Rapid Development Kits
Each kit contains an SBC module mounted on an applicable Carrier Board that features all hardware needed for immediate start-up of the module, as well as external break-out of applicable signals from the SBC. The included PHYTEC Spectrum CD-ROM provides complete electronic documentation, demo programs and evaluation software development tools.
PHYTEC Rapid Development Kits truly offer a Rapid Development solution by providing you with all the necessary ingredients with which to jump start your embedded design, reduce time-to-market and propel your concept to prototype and finished product.
Available RDK Packages for this SBC
RTOSes & Tools
The availability of tools is a primary criteria in the selection of a microcontroller for embedded development. Just as PHYTEC provides board-level support and Rapid Development Kits enabling easy evaluation, test and OEM integration of microcontroller cores for embedded designs, we also work closely with other partners up and down the embedded solutions chain. This ensures optimized interoperability of our boards with other tools, and provides embedded developers with what they need to speed design concepts to product and market.
