Germany
France
phyCORE®-XC161
Rapid Development Kit
SOM comparison table
Compare PHYTEC's large variety of SOM solutions.
Learn more »
Design Services
Short on resources? See how our design team can help. Learn more »
PHYTEC Production
Our in-house production facilities support all stages of your product cycle.
Learn more »
Technical Support
Talk to our technical staff with every call. No waiting for answers. Learn more »
The PHYTEC Advantage
Shorten time-to-market, reduce development costs, and avoid design risks.
Learn more »
Customer Testimonials
Read what some of our customers have to say.
Learn more »
 |
PART #: KPCM-020-0020E $459.00 |
Kit Description
The phyCORE SOM is designed to be plugged into a PHYTEC Carrier Board. The PHYTEC Carrier Board contains the I/O connectors as well as any other interface circuitry not provided on the phyCORE module itself. The phyCORE module, combined with the PHYTEC Carrier Board, provides a platform to jump start embedded designs and propel concept to prototype and finished product.
- phyCORE-XC161 System on Module
- Carrier Board PCM-997-XC enabling immediate start-up of your module
- Bare PCB Expansion Board (PCM-988)
- AC adapter
- DB-9 serial cable
- PHYTEC Spectrum CD-ROM
- PHYTEC FlashTools
- Guaranteed Start-Up: PHYTEC guarantees successful start-up of all example programs on the Spectrum CD-ROM
Carrier Board
Each phyCORE module supported by the phyCORE Carrier Board HD200 has a section in its manual dedicated to the use of the module in question with the phyCORE Carrier Board HD200.
The phyCORE Carrier Board HD200 provides a flexible development platform enabling quick and easy start-up and subsequent programming of the PHYTEC System on Modules with 200-pin high density Molex connectors. Depending on the controller features of the implemented SOM, simple jumper configuration routes the available serial interfaces (RS-232, RS-485, CAN) to corresponding DB-9 connectors. The Carrier Board also offers a CAN transceiver is available that can be supplied with a separate voltage for galvanic isolation by a special CAN connector. The Carrier Board design allows easy connection of additional expansion boards featuring various functions that support fast and convenient prototyping and software evaluation.
Technical Features
- Carrier Board in EURO-card dimensions (100 x 160 mm)
- Receptacle socket for speedy and secure insertion, and subsequent programming, of the PHYTEC System on Modules with 200-pin high-density (0.635 pitch) Molex connectors
- Dual DB-9 sockets for serial RS-232 interface connectivity
- Dual DB-9 connectors for CAN or RS-485 interface connectivity
- Space for an optional DS2410 Silicon Serial Number chip (for networking identification purposes)
- Receptacle for an optional battery
- Low-voltage socket for power supply connectivity
- Voltage supply for external devices and subassemblies
- GND connector (for connection of GND signal of measuring devices such as an oscilloscope)
- Expansion Bus: address, data, interface and all applicable I/O signals route from implemented phyCORE module to 2x80-pin Molex connectors, enabling connectivity to Add-On hardware
