phyCORE®-ST10F269 HS/E
Rapid Development Kit
The PHYTEC Advantage
With over 20 years of experience, see what makes PHYTEC the best choice for your development needs.
Faster-to-Market
Take advantage of PHYTEC products to shorten time-to-market, reduce development costs, and avoid substantial design risks.. More…
Make vs. Buy
Why make your own when you can buy PHYTEC off-shelf solutions? More…
Design Services
Let PHYTEC assist you in the design of your end product. More…
Immediate Support
Talk to PHYTEC technical staff with every call. No waiting for answers. More…
Your OEM solution
Low EMI and Mix-Speed design, robust interconnects, industrial temp range, production-ready BSPs. More…
 |
PART #: KPCM-018-140C3UE $389.00 |
Kit Description
The phyCORE SBC module is designed to be plugged into a PHYTEC Carrier Board. The PHYTEC Carrier Board contains the I/O connectors as well as any other interface circuitry not provided on the phyCORE module itself. The phyCORE module, combined with the PHYTEC Carrier Board, provides a platform to jump start embedded designs and propel concept to prototype and finished product.
- phyCORE®-ST10F269 HS/E Single Board Computer module
- Carrier Board PCM-997-V2 enabling immediate start-up of your module
- AC adapter
- DB-9 serial cable
- PHYTEC Spectrum CD-ROM, including software, electronic documentation, PHYTEC FlashTools and demos
- Guaranteed Start-Up: PHYTEC guarantees successful start-up of all example programs on the Spectrum CD-ROM
Carrier Board
Each phyCORE module supported by the phyCORE Carrier Board HD200 has a section in its manual dedicated to the use of the module in question with the phyCORE Carrier Board HD200.
The phyCORE Carrier Board HD200 provides a flexible development platform enabling quick and easy start-up and subsequent programming of the PHYTEC Single Board Computer modules with 200-pin high density Molex connectors. Depending on the controller features of the implemented SBC module, simple jumper configuration routes the available serial interfaces (RS-232, RS-485, CAN) to corresponding DB-9 connectors. The Carrier Board also offers a CAN transceiver is available that can be supplied with a separate voltage for galvanic isolation by a special CAN connector. The Carrier Board design allows easy connection of additional expansion boards featuring various functions that support fast and convenient prototyping and software evaluation.
Technical Features
- Carrier Board in EURO-card dimensions (100 x 160 mm)
- Receptacle socket for speedy and secure insertion, and subsequent programming, of the PHYTEC Single Board Computer modules with 200-pin high-density (0.635 pitch) Molex connectors.
- Dual DB-9 sockets for serial RS-232 interface connectivity
- Dual DB-9 connectors for CAN or RS-485 interface connectivity
- Space for an optional DS2410 Silicon Serial Number chip (for networking identification purposes)
- Receptacle for an optional battery
- Low-voltage socket for power supply connectivity
- Voltage supply for external devices and subassemblies
- GND connector (for connection of GND signal of measuring devices such as an oscilloscope)
- Expansion Bus: address, data, interface and all applicable I/O signals route from implemented phyCORE module to 2x80-pin Molex connectors, enabling connectivity to Add-On hardware
