DIPmodul-164
Rapid Development Kit

PART #: KMM-215 $239.00 Add to Cart

---

Kit Description

The phyCORE SBC module is designed to be plugged into a PHYTEC Carrier Board. The PHYTEC Carrier Board contains the I/O connectors as well as any other interface circuitry not provided on the phyCORE module itself. The phyCORE module, combined with the PHYTEC Carrier Board, provides a platform to jump start embedded designs and propel concept to prototype and finished product.

• DIPmodul-164 Single Board Computer module
• Carrier Board MM-993 enabling immediate start-up of your module
• AC adapter
• DB-9 serial cable
• PHYTEC Spectrum CD-ROM, including software (evaluation version), electronic documentation, PHYTEC FlashTools and demos
• Guaranteed Start-Up: PHYTEC guarantees successful start-up of all example programs on the Spectrum CD-ROM

---

Carrier Board

The DIPmodul/CANopen Chip Carrier Board, in EURO-card dimensions (160 x 100 mm), provides a flexible development platform enabling quick and easy start-up and subsequent programming of Single Board Computer modules in DIP-40 dimensions. The Carrier Board design allows easy operation of the implemented module in a Controller Area Network (CAN) bus system and connection of additional expansion boards featuring various functions that support fast and convenient prototyping and software evaluation. The DIPmodul/CANopen Chip Carrier Board is mounted with all necessary hardware components - including 4x push buttons, 4x user programmable LEDs, 2x potentiometers, a DB-9 socket for RS-232 and a DB-9 plug for CAN connectivity - required for quick and solder-free start-up and operation of the implemented module with user-designed software.

Technical Features

• Carrier Board in EURO-card dimensions (160 x 100 mm) for start-up, and subsequent programming, of the following modules:
  • CANopen Chip-505CA
  • DIPmodul/CANopen Chip-164
  • DIPmodul/CANopen Chip-F40
• DB-9 socket for serial RS-232 interface connectivity
• DB-9 plug for CAN interface connectivity
• insertable jumpers enabling configuration of I/O signals
• CAN bus interface circuitry
• RS-232 interface
• 4x push buttons for digital input simulation
• 4x user LEDs for digital output simulation
• 2x potentiometers for analog input simulation
• 1x general purpose input/output connector for easy connection of external peripheral devices
• 1x additional RUN-/STOP switch (for IEC1131-PLC-Chip)
• 2x additional LEDs for RUN/STOP and ERROR indication (for IEC1131-PLC-Chip)
• wire wrap field supporting development of user-designed peripheral hardware
• Reset switch (configurable signal level)
• Boot switch (configurable signal level)
• low voltage terminal block connects to a voltage regulator accepting an unregulated input voltage in a range from 8 to 13 V
• voltage regulator 5VDC / 1 A (optionally 3.3VDC or adjustable)