phyCORE®-PXA270
Rapid Development Kit

NEW Acceleration Kit $599.00 More... Basic Development Kit $799.00 Add to Cart LCD/Touch Panel Development Kit $1,399.00 Add to Cart

---

Kit Description

The phyCORE SBC module is designed to be plugged into a PHYTEC Carrier Board. The PHYTEC Carrier Board contains the I/O connectors as well as any other interface circuitry not provided on the phyCORE module itself. The phyCORE module, combined with the PHYTEC Carrier Board, provides a platform to jump start embedded designs and propel concept to prototype and finished product.

Acceleration Kit (PART #: KPCM-027-Accel)

• Click here form more information about this kit

 

Basic Rapid Development Kit (PART #: KPCM-027-Basic)

• phyCORE-XScale/PXA270 Single Board Computer module
• phyCORE-XScale Carrier Board (PCM-990-P2)
• phyCORE-XScale Expansion Board (PCM-985)
• flatband JTAG cable (JA-001-PXA)
• Bare PCB Expansion Board (PCM-988)
• serial cable, parallel cable, Ethernet crossover cable, AC adapter
• PHYTEC Tool CD including SBC hardware manual, software, Linux and WinCE 5.0 RTOS kernels and Controller User's Manual
• Windows Embedded CE Image
• Linux 2.6 Kernel

 

LCD/Touch Panel Development Kit (PART #: KPCM-027-LCDTP)

• phyCORE-XScale/PXA270 LCD Basic Kit, as described above
• Sharp LQ084V1DG21 LCD (AC038)
• LCD Inverter (IA092)
• LCD Cable (KW092)
• DMC AST084 Touch Panel Interface (AC037)

---

Carrier Board (PCM-990)

The phyCORE-PXA270 Carrier Board serves start-up and programming of the phyCORE-PXA270 and phyCORE-PXA255 Single Board Computer modules. The Carrier Board is fully equipped with all mechanical and electrical components necessary for the speedy and secure insertion and subsequent programming of the high-density phyCORE module. These components include TFT display connection, touch screen interface, Ethernet transformer and connector, DB-9, USB and power socket connectors. The phyCORE module can be plugged like a "big chip" onto the Carrier Board's mating Molex connectors. Once programmed, the phyCORE module can be removed from the Carrier Board and inserted like a "big chip" in a target hardware application. Given the compact nature of the Carrier Board, it is possible to OEM the complete hardware platform in human-machine-interface (HMI) applications.

Technical Features

• Molex connectors for mating with phyCORE-PXA270 SBC module
• Connector for 8.4" Sharp TFT display with 640*480 pixel resolution, incl. adjustable inverter for background illumination
• AC97 controller WM9712L with touch and sound interface (Line-IN, Line-OUT, MIC-IN and 0.4 watts speaker)
• Two DB-9 sockets for RS-232 interface from FF-UART and BT-UART, 2*5 pin header for IR-UART
• One DB-9 plug for CAN interface, optical isolation
• RJ-45 Ethernet connector with transformer for 100/10 MBit/s
• USB Host socket for PXA270 USB host interface
• USB client socket for PXA270 USB client interface
• Power supply for unregulated input voltage from 12 V (optional 24V). It supplies regulated +3.3 V for the phyCORE-PXA270. Additional +5 V is created for the IDE and CF card and LCD/inverter circuitry.
• Optional battery charger circuitry for NiMH batteries
• Power magement for MMC, CF, IDE and LC display
• Two user programmable LEDs
• Optional IDE interface for two 2.5" hard disks (Master / Slave)
• Interface for Matrix keyboards
• JTAG interface
• AC97 expansion port
• Reset and GPIO push button

Additional Expansion Board:

• MultiMedia card slot
• Compact Flash card slot
• Reset button
• GPIO button
• USB-OTG socket for PXA270 USB interface
• 4 user LEDs via PLD GPIOs

Design Schematics

phyCORE Target Circuitry Reference Design

Feb. 2006

1220.3

286 KB