phyCORE®-DS80C390
Rapid Development Kit
The PHYTEC Advantage
With over 20 years of experience, see what makes PHYTEC the best choice for your development needs.
Faster-to-Market
Take advantage of PHYTEC products to shorten time-to-market, reduce development costs, and avoid substantial design risks.. More…
Make vs. Buy
Why make your own when you can buy PHYTEC off-shelf solutions? More…
Design Services
Let PHYTEC assist you in the design of your end product. More…
Immediate Support
Talk to PHYTEC technical staff with every call. No waiting for answers. More…
Your OEM solution
Low EMI and Mix-Speed design, robust interconnects, industrial temp range, production-ready BSPs. More…
 |
LEGACY PRODUCT:Call for more information! 800-278-9913 (in the U.S.)
|
Kit Description
The phyCORE SBC module is designed to be plugged into a PHYTEC Carrier Board. The PHYTEC Carrier Board contains the I/O connectors as well as any other interface circuitry not provided on the phyCORE module itself. The phyCORE module, combined with the PHYTEC Carrier Board, provides a platform to jump start embedded designs and propel concept to prototype and finished product.
- phyCORE®-DS80C390 Single Board Computer module
- Carrier Board PCM-992 enabling immediate start-up of your module
- AC adapter
- DB-9 serial cable
- PHYTEC Spectrum CD-ROM, including software (evaluation version), electronic documentation, PHYTEC FlashTools and demos
- Guaranteed Start-Up: PHYTEC guarantees successful start-up of all example programs on the Spectrum CD-ROM
Carrier Board
The phyCORE Carrier Board LD 5V provides a flexible programming platform enabling quick and easy start-up, and subsequent programming of, 8- and 16-bit PHYTEC Single Board Computer modules with low density 2.54 mm pitch pin headers. Depending on the controller features of the implemented SBC module, simple jumper configuration routes the available serial interfaces (RS-232, RS-485, CAN) to corresponding DB-9 connectors. The Carrier Board also offers a CAN transceiver is available that can be supplied with a separate voltage for galvanic isolation by a special CAN connector.
Technical Features
- Carrier Board in EURO-format (100x160 mm)
- receptacle socket for speedy and secure insertion, and subsequent programming, of the PHYTEC Single Board Computer modules with low density (2.54 mm pitch) header connectors
- 2x DB-9 connectors for RS-232 interfaces
- 2x DB-9 connectors for CAN, RS-485 or I2C interfaces
- 2x opto-decoupled CAN transceivers
- primary serial interface Handshake signals set for boot or Reset (jumper-configurable)
- voltage regulator for 5V and 3.3V phyCORE modules
- Expansion Bus: address, data, interface and all applicable I/O signals route from implemented phyCORE module to 2x80-pin Molex connectors, enabling connectivity to add-on hardware
