miniMODUL-552
Rapid Development Kit
The PHYTEC Advantage
With over 20 years of experience, see what makes PHYTEC the best choice for your development needs.
Faster-to-Market
Take advantage of PHYTEC products to shorten time-to-market, reduce development costs, and avoid substantial design risks.. More…
Make vs. Buy
Why make your own when you can buy PHYTEC off-shelf solutions? More…
Design Services
Let PHYTEC assist you in the design of your end product. More…
Immediate Support
Talk to PHYTEC technical staff with every call. No waiting for answers. More…
Your OEM solution
Low EMI and Mix-Speed design, robust interconnects, industrial temp range, production-ready BSPs. More…
 |
LEGACY PRODUCT:Call for more information! 800-278-9913 (in the U.S.)
|
Kit Description
The phyCORE SBC module is designed to be plugged into a PHYTEC Carrier Board. The PHYTEC Carrier Board contains the I/O connectors as well as any other interface circuitry not provided on the phyCORE module itself. The phyCORE module, combined with the PHYTEC Carrier Board, provides a platform to jump start embedded designs and propel concept to prototype and finished product.
- miniMODUL-552 Single Board Computer module
- Carrier Board MM-499-L2 enabling immediate start-up of your module
- AC adapter
- DB-9 serial cable
- PHYTEC Spectrum CD-ROM, including software (evaluation version), electronic documentation, PHYTEC FlashTools and demos
- Guaranteed Start-Up: PHYTEC guarantees successful start-up of all example programs on the Spectrum CD-ROM
Carrier Board
The PHYTEC Carrier Board, in EURO-card dimensions (160 mm x 100 mm), is a universal carrier board for start-up and programming of all 5V PHYTEC micro- and miniMODUL Single Board Computer modules. The Carrier Board is fully equipped with all mechanical and electrical components necessary for the speedy and secure insertion of applicable modules. Simple jumper configuration readies the Carrier Board's connectivity to any PHYTEC module, which plug pins down into the available pin header contact strips. A wire wrap (60 mm x 65 mm) allows the Carrier Board to serve as an excellent prototyping platform.
Technical Features
- Simple jumper configuration allows use of the Carrier Board with all 5V PHYTEC micro- and miniMODUL Single Board Computers
- Pin header receptacles accommodating both micro- and miniMODULs
- Wire wrap field (60 mm x 65 mm) supports development of user-designed circuitry
- DB9-socket for RS-232 interface
- Second DB9-plug which can be configured as a CAN or RS-485 interface according to user needs and the underlying controller
- Reset switch
- Boot switch
- Space for population of a DS2401 Silicon Serial Number chip (for network identification purposes)
- VG96-connector
- Single power source via a low-voltage socket
- (Unregulated 8V... -13 V=/500 mA) or via VG96 connector (regulated +5V=/ 500 mA)
