pciGRABBER-4plus pc/104 GRABBER-4plus

pciGRABBER-4plus

PCI-insert FrameGrabber Connectivity

pciGRABBER-4plus

PART #: VD-009-X1

Configuration:
3 composite-, 1 S-video

$199.00 / single unit

Add to Cart
pciGRABBER-4plus

PART #: KVD-009-X1

Configuration:
pciGRABBER-4plus Kit with WK075 combo cable, AK056 camera, AO017 lens

$759.00 / single unit

Add to Cart

Description

Start your image processing application using the pciGRABBER-4plus FrameGrabber, which easily inserts into a PCI slot on a host computer. SMB sockets enable connection of up to two video sources, all cameras can be connected via a single pin header connector. The operating voltage for the camera, an I²C-Bus and a transistor-operated I/O port are also available on this connector. Twelve additional TTL-level I/O signals are available on a second pin header connector row. The pciGRABBER offers a 256 Byte EEPROM for storage of such data as a software protection key and 3 or 9 composite inputs, that can be switched via integrated multiplexers via software. An S-Video input is available for applications with greater requirements in terms of color replication. Digitized images are stored directly in the on-board CPU memory in real-time by the Busmaster-DMA. The included demos and software drivers allow the user to address the Grabber from a user program with simple function calls in DOS, Windows. Example programs and a detailed manual simplify the introduction to the programming phase.

Features

  • 5V PCI form-factor insert-card
  • Up to 9 x composite, 1 x S-video input
  • Maximum resolution 768 x 576 pixels
  • Supports PAL- and NTSC sources
  • Various color resolution and color format selection from the data stream: from 16 million RGB32 colors to Y8 gray scale for black and white
  • Independent scaling of image size and resolution and programmable image parameters
  • Direct image transfer to the operating memory in real-time
  • DOS, Windows 95/98/NT/ME/2000/XP, Twain, LabView, QuickCog and Linux driver software included
  • 12 freely-configurable I/O signals (TTL) for control of user-specific add-on hardware
  • Buffered I/O signal (0V to 28V)
  • I²C interface and 256 byte EEPROM for user data
  • Supports multiple Grabbers in a single system
  • Software compatible to the pc/104GRABBER

Technical Documentation

pciGRABBER-4plus Hardware Manual

-

L-556e

2.1 MB