Spectrum Spacer

PCAN-ISA Insert-card

ISA-slot CAN Connectivity

PCAN-ISA Insert-card

PART #: IPEH-002074

Configuration: PC-ISA CAN insert-card (single channel)

$129.00 / single unit

Add to Cart

PART #: IPEH-002075

Configuration: PC-ISA CAN insert-card (dual channel)

$159.00 / single unit

Add to Cart

PART #: IPEH-002076

Configuration: PC-ISA CAN insert-card (single channel, optical isolation)

$219.00 / single unit

Add to Cart

PART #: IPEH-002077

Configuration: PC-ISA CAN insert-card (dual channel, optical isolation)

$299.00 / single unit

Add to Cart


Description

CAN developments and applications for communication in a system with sensors, actuators and the like for visualising information are becoming increasingly common. Likewise PCs are often available, which can handle one of the mentioned tasks or can serve as a toolbox for the CAN development. The PC-ISA-CAN-Card serves as an easy to use and cost-effective solution for connection of a CAN-Bus to the PC. Configuration is flexible for adaptation to the PC, since eight different port adresses and interrupts may be selected. The PC-ISA-CAN-Card is distributed with DOS- and Windows-software and sources for user programming.

The size of the plug-in card  is kept small in accordance with the ISA standard (16-bit). Consequently it is also suitable in PCs, where the area is substantially equipped. Diverse configuration possibilities enable the port addresses to be configured to 100h, 120h, 140h, 220h, 240h, 300h, 320h or 340h, whereby the hardware interrupts can be configured to IRQ3, IRQ4, IRQ5, IRQ7, IRQ10, IRQ11, IRQ12 or IRQ15 (via jumper). The card is also still capable of running on a PC with a 286 class processor. The interrupts can be shared with multiple PC-ISA-CAN-Cards in a single PC.

The card is equipped with the CAN-controller SJA1000 and the driver 82C251. The connection to the CAN-bus occurs via a 9-pin SUB-D plug, whose pin assignments correspond to the CiA-recommendation DS 102-1.


Features

  • PC plug-in card for 16-bit ISA-connector
  • Selection out of eight port and eight interrupt addresses
  • 2 separat configurable CAN-controller SJA1000 with 16 MHz
  • Agree with CAN-specification 2.0A (standart-frame) and 2.0B (extendet-frame)
  • Optional available with galvanic isolation up to 500 Volt
  • Space saving SMD technology (14cm x 5cm)
  • Connection to the CAN-bus via SUB-D 9-pin (according to CiA DS 102-1)
  • Transmission rate of up to 1MBaud
  • Hardware reset from software
  • Parallel use of mutiple cards in one PC (interrupt sharing)
  • Individual activation of the CAN-bus voltage supply (5V / 12V)

Technical Documentation & Demos

PCAN-ISA Hardware Manual

-

ISAe

1.5 MB

PCAN-ISA Data Sheet
-
PCAN-ISA_DS 24 KB
RoHS Compliant Certificate
-
  127 KB

PCAN-ISA Installation Disk

-

ISA.zip

6.58 MB

Products | OEM Integration | Support & Downloads | Tool Partners | News & Events | About PHYTEC | Home | Terms & Conditions
Copyright 2008 PHYTEC AMERICA, LLC. All rights reserved.