PC-to-CAN Interfaces CAN Accessories CAN Industrial Control CAN/CANopen IO Nodes CAN Software

CAN/CANopen IO Nodes

PEAK

PEAK-PCAN-MicroMOD

PEAK-PCAN-MicroMOD

Subminiature CAN node operating at a single 5VDC power supply features a variety of analog and digital inputs and outputs. The integrated firmware allows for easy configuration of the target system and design of networks of up to 64 devices on a single CAN bus.

PEAK-PCAN MicroMod Baseboard

PEAK-PCAN-MicroMod Baseboards

Ready-to-go CAN/CANopen I/O box in metal casing (51*60*20 mm) with snap-in terminal connector suitable for a wide range of industrial control applications. Firmware included in the MicroMod CPU module handles all input/output traffic and CAN communication.

SYS TEC

SYSTEC sysWORXX IO-X1

SYS TEC sysWORXX CANopen I/O Device

Compact and cost effective CANopen remote I/O extensions featuring a high density of industrial proven IOs. The modules come ready-to-deploy including all connectors, plugs and cables. Extensive internal diagnostic routines are implemented to ensure a most reliable and safe operation. The sysWORXX I/O modules implement CANopen slave devices according to CANopen communication profile CiA 301 with device profiles CiA 401 and CiA 404.

CANopen Chip-505CA

SYS TEC CANopen Chip-505CA

The CANopen-Chip C505CA is a tiny yet highly cost-effective CANopen Slave I/O node based on the 8051 Infineon C505CA microcontroller. The integrated firmware allows I/O data processing according to CiA DS301 and DSP 401 standards. Various baud rate, I/O and node ID configuration via solder jumpers.

CANopen Chip-164

SYS TEC CANopen Chip-164

The CANopen-Chip 164 is a tiny yet highly cost-effective CANopen Slave I/O node based on the 16-bit Infineon C164CI microcontroller. The integrated firmware allows I/O data processing according to CiA DS301 and DSP 401 standards. Various baud rate, I/O and node ID configuration via DIP switches.

CANopen Chip-F40

SYS TEC CANopen Chip-F40

The CANopen-Chip F40 is a tiny yet highly cost-effective CANopen Slave I/O node based on the Fujitsu MB90F40xxx microcontroller. The integrated firmware allows I/O data processing according to CiA DS301 and DSP 401 standards. Various baud rate, I/O and node ID configuration via DIP switches.

Top