Germany
France
Europe
CANopen Chip-505
CANopen Hardware Node
Design Services
Short on resources? See how our design team can help. Learn more »
CAN Partners
See how the PHYTEC ecosystem can help with your success. Learn more »
Technical Support
Talk to our technical staff with every call. No waiting for answers. Learn more »
SOM Advantage
Shorten time-to-market, reduce development costs, and avoid substantial design risks. Learn more »
Customer Testimonials
Read what some of our customers have to say.
Learn more »
CANopen Chip-505
Description | Features | Pricing & Ordering
Documentation & Demos
Description
The CANopen Chip-505 is a tiny yet highly cost-effective Single Board Computer based on the 8051-compatible Infineon C505CA microcontroller. The size of a 40-pin DIP device, the board is designed for use as a pre-configured I/O-node in a CANopen network, rather than as a stand alone micro engine. The CANopen Chip-505 is certified by CiA (CAN in Automation, e.V.)
A DIPmodul/CANopen Chip Carrier Board is also available to provide a flexible development platform for easy start-up and subsequent programming. The Carrier Board design allows easy operation of the implemented module in a Controller Area Network (CAN) bus system and connection of additional expansion boards featuring various functions that support fast and convenient prototyping and software evaluation.
Features
I/O Node:
- Single Board CANopen-node in 40-pin DIP dimensions
- Infineon C505CA 8051-compatible controller
- Controller signals and ports extending to standard-width (2.54 mm) pin header rows lining the edges of the board include:
- 12 freely-available port pins
- Full 2.0B passive CAN signals CAN_H & CAN_L
- 2 reference voltage pins for on-chip A/D-converter
- 2 control pins
- 2 address and 8 data lines for connectivity to an external 8-bit port
- 32 KB external SRAM, 64 KB external Flash
- 2 KB serial EEPROM for storage of CANopen protocol configuration parameters
- PCA82C251 CAN transceiver
- Meets CiA DS 301 V3.0 and DSP 401
- 8-bit jumper header enables configuration of NODE-ID (4-bit), baudrate (2-bit) and I/O (2-bit)
Carrier Board:
- EURO-card dimensions (160 x 100 mm)
- DB-9 socket for serial RS-232 interface connectivity
- DB-9 plug for CAN interface connectivity
- Insertable jumpers enabling configuration of I/O signals
- CAN bus interface circuitry
- RS-232 interface
- 4x push buttons for digital input simulation
- 4x user LEDs for digital output simulation
- 2x potentiometers for analog input simulation
- 1x general purpose input/output connector for easy connection of external peripheral devices
- 1x additional RUN-/STOP switch (for IEC1131-PLC-Chip)
- 2x additional LEDs for RUN/STOP and ERROR indication (for IEC1131-PLC-Chip)
- Wire wrap field supporting development of user-designed peripheral hardware
- Reset switch (configurable signal level)
- Boot switch (configurable signal level)
- Low voltage terminal block connects to a voltage regulator accepting an unregulated input voltage in a range from 8V to 13V
- Voltage regulator 5VDC / 1 A (optionally 3.3VDC or adjustable)
Pricing & Ordering
| Part Number & Configuration | Price | |
| Part # SYS-MM-214-CA05V2 CANopen I/O node-505 |
$84.00 / single unit |
|
| Part # SYS-MM-993 Carrier Board for CANopen I/O Node w/ serial cable and 9V Adapter |
$139.00 / single unit |
Technical Documentation & Demos
| File Download | Size | |
| CANopen Chip-505 System Manual | 333 KB | |
| Carrier Board Hardware Manual | 160 KB | |
| SYS prefix added to various SYSTEC products | 212 KB |
Top