PC-to-CAN Interfaces CAN Accessories CAN Industrial Control CAN/CANopen IO Nodes CAN Software

COMBImodul-515

Integrated 16-bit Industrial Control Unit

PART #: PHYPS-406-U

LEGACY PRODUCT - Only ONE unit available!

$479.00 / single unit

Description

COMBImoduls extend PHYTEC’s proven insert-ready microcontroller-based System on Modules for use as compact automation control systems for universal processing of standard industrial signals. COMBImoduls target measurement, control and data processing applications. They are also an ideal control solution in distributed CAN systems in conjunction with other PHYTEC CAN hardware and software products. PHYTEC COMBImoduls offer additional I/O circuitry, thereby extending the basic microcontroller resources available on PHYTEC System on Modules. The COMBImodul-515 is based on the C515C controller from Infineon. It offers 64 to 160 KB battery-buffered SRAM and 128 to 512 KB Flash Optional EEPROM is available for additional data storage. The COMBImodul features a variety of digital I/O ports, analog inputs and outputs and PWM output signals. Peripheral sensors, actuators and control devices can be easily connected to the board using lug connector strips. Use of stable, removable “COMBICON” screw thimbles enables easy exchange of the peripheral units without additional wiring. The COMBImodul is housed in an industry-proven PHOENIX casing and can be mounted on a DIN/EN rail.

Features

Integrated control unit encased in PHOENIX housing and mountable on a DIN/EN rail
Processor: Infineon C515C
64 KB (optional 160 KB) battery-buffered SRAM
128 KB CODE-Flash (optional 512 KB)
128 KB DATA-Flash
Optional 32 KB EEPROM
8 KB I²C EEPROM for additional DATA storage
16 optically-isolated digital inputs (24V DC)
2 x interrupt capable digital inputs
2 x timer inputs
Optical isolation: galvanically-decoupled digital inputs via opto-couplers (2.5kV DC to system bus)
1 x digital input with reduced delay time for use as counter, 24 VDC optical isolated
4 x analog inputs (10-bit resolution):
Voltage.: 0V to +10V
Optional 0V to +20 mA, 0V to +5V

Digital Outputs:

8 x relay outputs, 250 VAC @ 3A with overvoltage protection
8 x short-circuit protected transistor outputs, 24 VDC @ 0.5A, switched by plus level
2 x PWM-outputs (minus, 24V, 0.5A)
2 x Analog Outputs (10-bit resolution, 0V to +10V)
Fast outputs support PWM applications, 24 VDC @ 0.5 A, switched by minus level

Interfaces:

RS-232 for download of user code to Flash and debugging, optional supplemental RS-232
Optically-isolated Full CAN interface
Optional PCMCIA 2.0 (Type II)

Supplemental Devices:

Battery-backed Real-Time Clock
Optional temperature sensor
Battery-buffered SRAM

Display Elements:

RUN/STOP switch
8-pin hex-coding switch, useable for CAN Node ID configuration
Eight status LED's (SYSErr, CANErr, RUN, CARD, B_low)
4-pin DIP-switch, can be used for CAN baud rate selection
Removable screw clamp crimping connectors

Separated Power Supply:

CPU and logic: 24V DC +20% / 3.6

I/O signals:

24 V DC +20% (galvanically decoupled)

Environmental temperature:

0°C to +55°C

Storage temperature:

-25°C to +60°C
Weight: ca. 550 grams

Technical Documentation & Demos

COMBImodul-515 Hardware Manual	-	L-335e	330 KB
COMBImodul-515 Startup Manual	-	L-568e	250 KB
Driver Manual for COMBImodul-515	-	L-343e	338 KB