COMBImodul-167
Integrated 16-bit Industrial Control Unit
 |
PART #: PHYPS-404-U-NoRTC Call PHYTEC for pricing and availability |
Description
COMBImoduls extend PHYTEC’s proven insert-ready microcontroller-based Single Board Computer modules for use as compact automation control systems for universal processing of standard industrial signals. COMBImoduls target measurement, control and data processing applications. They are also an ideal control solution in distributed CAN systems in conjunction with other PHYTEC CAN hardware and software products. PHYTEC COMBImoduls offer additional I/O circuitry, thereby extending the basic microcontroller resources available on PHYTEC Single Board Computers. The COMBImodul-167 is based on the C167CR controller from Infineon. It offers 64 to 160 KB battery-buffered SRAM and 128 to 512 KB Flash Optional EEPROM is available for additional data storage. The COMBImodul features a variety of digital I/O ports, analog inputs and outputs and PWM output signals. Peripheral sensors, actuators and control devices can be easily connected to the board using lug connector strips. Use of stable, removable “COMBICON” screw thimbles enables easy exchange of the peripheral units without additional wiring. The COMBImodul is housed in an industry-proven PHOENIX casing and can be mounted on a DIN/EN rail. This product is only available WITHOUT the RTC device because of a part discontinuation from the RTC manufacturer.
Features
- Integrated control unit encased in PHOENIX housing and mountable on a DIN/EN rail
- Processor: Infineon C167CR
- 256 KB (to 1 MB) battery-buffered SRAM
- 256 KB CODE-Flash (1 MB)
- 8 KB I²C EEPROM for additional DATA storage
- 24x digital inputs
- 16x interrupt capable digital inputs
- 5x timer inputs
- optical isolation: galvanically-decoupled digital inputs via opto-couplers (2.5kV DC to system bus)
- 4x Analog Inputs: (10-bit resolution)
- voltage.: 0…+10V
- optional 0…+20 mA, 0…+5V
Digital Outputs:
- 8x relay outputs (125V AC @ 3A, 250V AC @ 3A) with overvoltage protection
- 8x short-circuit protected transistor outputs, 24 VDC @ 0.5A, switched by plus level
- 2x PWM outputs (minus, 24V, 0.5A)
- 2 Analog Outputs (10-bit resolution, 0…+10V)
Interfaces:
- RS-232 for download of user code to Flash and debugging, optional supplemental RS-232
- optically-isolated Full CAN interface
Supplemental Devices:
- optional temperature sensor
- battery-buffered SRAM
Display Elements:
- two-pin hex-coding switch (8-poled), DIP-switch (4-poled), 3 status LED's, 1 power LED
- Run/Stop-switch
- 4-pin DIP-switch, can be used for CAN baud rate selection
- 3x user-definable LED's
- 1x power status LED
- removable screw clamp connectors
Separated Power Supply:
- CPU and logic: 24V DC +20% / 3.6
I/O signals:
- 24 V DC +20% (galvanically decoupled)
Environmental temperature:
- 0 C …+55 C
Storage temperature:
- -25 C…+60 C
Weight:
- ca. 550 grams
Technical Documentation & Demos
|
- |
L-540e |
330 KB |
|
|
- |
L-516e |
250 KB |
|
|
- |
L-344e |
338 KB |
