XScale/PXA255: Loading UBoot Bootloader
Question: How do I load U-Boot Bootloader to my phyCORE-PXA255? Answer: For downloading the U-Boot Bootloader please refer to the instructions for...

Flash Tools: Bootloader
Question: I am intersted in your products but had a question regarding the boot loader FlashTools you provide. I was wondering if the the boot loader that resides...

ARM7/LPC2294: Hardware Design Problem
Description: There is an apparent problem with the hardware design of  PCM-023-SK-2294.  The problem is with the compatibility of the RESET I/O...

ARM7/LPC2294: IAR Workbench and .HEX files
Question: In IAR workbench I found lots of output format in the linker tab option. there are 3/4 types of .hex type file format ( such as- tektronix , mpds-i). But...

ARM7/LPC2294: Processor Clock Frequency Calculation
Question: What is the processor clock frequency if the PLL configuration Register is set to 0X00000025? PLLCFG_Val EQU 0x00000025 Answer: The processor clock is...

XScale/PXA270: PCMCIA IDE
Question: Do you support the sockets for the PCMCIA ? Can I connect a HDD 2.5” in ATA to your card without special controller? Answer: The PXA270...

ARM7/LPC2294: Internal Flash Won't Execute after JLink Disconnect
Problem: I have the phyCORE-LPC2294 module and development board with IAR tools. Is there something special I need to do to get my application to run stand-alone? I...

XScale/PXA: Jtage Prob (JA-001-PXA) for phyCORE-PXA255/270
Question: Can I use the Jtage Prob (JA-001-PXA) for debugging? Answer: PHYTEC recommends several Jtag emulators that work with the phyCORE-PXA270: ...

ARM7/LPC2294: uClinux
Question: I work with phyCORE-ARM7/LPC2294 development board with 4 MB of flash and 8 MB of SRAM memory. Default uClinux package from...

Flash Tools: Downloads
Question: Whare can I find the Flash Tools for downloading code to the on board external flash for the 8 or 16 bit PHYTEC single board computers, phyCORE...

CAN interface signals

Download updated versions of stand-alone application

PCAN software packages

Configuring and Updating the Boot Loader

SYS_EN pin on Acceleration PCB

TPU troubles

Bad Magic Number error

Problems launching MicroMod config. utility

PCB layout

Download updated versions