Customer Applications

Apollo Video Technologies
Apollo Video Technology is a leading manufacturer of on-board and in-vehicle digital video monitoring systems for pupil and public transit, law enforcement, military, freight transport, fire and EMS applications. The niiu – a “network intelligent interface unit” - is based on the phyCORE-LPC3250 SOM, a custom Carrier Board designed by PHYTEC and a Linux operating system. It extends the functionality of Apollo’s RoadRunner Digital Video Recorder base system by offering a 4-port Ethernet expansion bridge as well as CAN and serial connectivity.

Athena Technologies
The GuideStar family of advanced flight control system products is produced by Athena Technologies. Equipped with Global Positioning System (GPS) technology, the GuideStar, populated by the phyCORE-MPC555, is a fault-tolerant, miniature flight control system that allows aircraft and ground vehicles to monitor position, flight attitude, and speed relative to the Earth.

California Institute of Technology - OVRO
The PHYTEC phyCORE-XACx insert-ready System on Module assists in control of radio satellite dishes at the Owens Valley Radio Observatory (OVRO), the largest university-operated radio observatory in the world located on the east side of the Sierra-Nevada mountain range near Bishop, California.

CIMAR & Autonomous Solutions
The PHYTEC phyCORE-MPC565 is deployed in the motor control unit of the NaviGATOR, a state-of the art unmanned ground vehicle built by CIMAR and Automonous Solutions to compete in the DARPA Grand Challenge, a 300 mile off-road journey from Los Angeles to Las Vegas.

Cornell University Race Team
An electronic control module and Powertrain system based on the phyCORE-MPC555 SOM are a part of this formula style, open-wheel race car which is designed, manufactured, tested and raced by Cornell Formula SAE.

CORNING Cable Systems GmbH & Co. KG
The phyCORE-PXA270, PHYTEC image processing hardware and the PXA270 Linux Board Support Package are used in the Corning Cable OptiSplice One and OptiSplice M90e fiber optic cable fusion splicer systems. These systems feature an intuitive user interface, dual cameras for fiber optical cable alignment, a fast heat-shrink oven and high-capacity Li-Ion battery - all in a reduced size.

Cray
PHYTEC provides the L0 Controller Module for use as a service processor in the Cray, XT3 a third generation massively parallel processor (MPP) supercomputer. A custom subassembly derived from the phyCORE-SC520, the L0, running on embedded ELinOS generates routing tables and monitors the health of the components on its host board,

Curtis Door Systems
The PHYTEC phyCORE-591 System on Module subassembly is used by Curtis Door Systems for control of a pneumatic, microprocessor-controlled door system in the Las Vegas Monorail.

Digital Hydraulic
DigitalHydraulic, a French company specializing in bionic technology, implemented the mini-MODUL-515C in their development of an artificial "pneumatic muscle" crane arm that was utilized by the French company Rousseau.

Hamilton Company
Hamilton Company is the worldwide leader in the design and manufacture of manual, semi-automated and robotic products for precision fluid measuring. The MICROLAB 600 diluter is a precision fluid measuring instrument based on Hamilton’s world renowned syringe technology. This semi-automated instrument uses positive displacement to achieve highly accurate and precise fluid aspirations and dispenses. PHYTEC’s phyCORE-LPC3250 System on Module, LPC3250 Windows Embedded CE BSP and design services allowed Hamilton to fast track their MICROLAB 600 product development effort.

IBA Dosimetry GmbH
IBA Dosimetry is a supplier of advanced dosimetric products for a wide range of applications in radiation therapy and diagnostic radiology. The IMRT (Intensity-Modulated Radiation Therapy) MatriXX device is the most advanced 2D solution for digital verification of absorbed dosage versus plan. The MatriXX deploys the phyCORE -MCF5485 and the MQX Embedded RTOS.

Olympus
Thousands of Olympus Innov-X on-site XRF analyzers are in use world-wide, the majority in remote areas or in demanding applications with continuous uptime requirements. A phyCORE-i.MX31 based SOM and a PHYTEC Design Services custom carrier board lend to the cutting-edge features of the Delta.

IVU Traffic Technologies AG
Our phyCORE-PXA255 and phyCORE-PXA270 SOMs, implemented in a Panel-PC, serves as the core logic in the IVU Traffic Technology AG single package solution i.box, an interactive vehicle-based collection, ticket printing and traffic control communication system.

Knosos
Designed for use with MicroNAV software, the K8 GPS communicator unit is a high-performance and low-cost GPS transmitter designed and manufactured by Knosos.

Moog Gmbh
The Moog M3000 is a high-performance digital motion control system for hydraulic and electric drive products. The modular M3000 comprises a Moog Servo Controller (MSC), Moog Axis Control Software (MACS) and numerous, optional extension modules. The system is based on the phyCORE-MPC5200B System On Module with FPGA and Linux Board Support Package. The M3000 provides multiple software-configurable interfaces for SSI, encoder, CANopen, RS232, Ethernet, Profibus and A/D outputs. It serves as the basis for distributed, motion control systems consisting of servo valves, servo-proportional valves, servo drives and RKP pumps.

proveo GmbH (Zebra Enterprise Solutions)
proveo provides world-class management solutions to track vehicles and other ground-support equipment at airports. Its Real-Time Locating System (RTLS) hardware and software incorporate GPS, GPRS and Wi-Fi technologies in conjunction with the phyCORE-PXA270 System on Module and Linux Board Support Package. PHYTEC provided turn-key development of the RTLS, including the housing. The RTLS is now supplied in volume for installations at airports in Frankfurt, Munich, London, Singapore, Dubai and other cities.

Robert Bosch
The Bosch DDU2 Digital Dashboard unit, manufactured by PHYTEC and using PHYTEC's modular technology based on the Infineon C537 controller, serves as the engine monitoring unit in the Audi F8, a top finisher at Daytona, Le Mans, the Charlotte 500 and Sebring, and many other races.

samtec automotive & software electronics GmbH
The samtec HSX is a modular, high-performance, multi-bus Modular Vehicle Communication Interface (MVCI) based on the phyCORE-MPC5200 tiny. This device offers up to 8x CAN and 4x FlexRay interfaces in accordance with ISO 22900 diagnostic protocol standards. The HSX provides high data through-put and precise time synchronization that enables network analysis of these high-speed automotive field-bus systems.

Smart Engineering Tools
The original Netway device, which provides real-time emulation and analysis for multiplex automotive networks with digital, analog and PWM signals capabilities is designed and manufactured by Smart Engineering Tools and based on the PHYTEC miniMODUL-167 SOM. A new generation of Netway devices was developed based the phyCORE-XC161

Verathon
The Verathon BladderScan® family is the gold standard in non-invasive bladder volume measurement, and is based on the phyCORE-PXA270. The BladderScan® BVI 9400 is a portable, noninvasive instrument that quickly and accurately measures urinary bladder volume and post-void residual (PVR) with 3D ultrasound.

Ziehm Imaging GmbH
Ziehm Imaging specializes in the development, manufacturing and world-wide marketing of mobile X-ray based imaging solutions that provide superb image quality and minimized radiation levels. The phyCORE-MPC555 System On Module is used in Ziehm Imaging C-arm mobile X-ray imaging systems.